PRODUCT
SMART-MC2 (Master)
Menu
SPECIFICATION
| Communication Method | RS-485 Communication |
| Power Input Voltage | AC 110 ~ 240V |
| Power Consumption | DC – within 0.6A, AC – within 60mA |
| Material | ABS |
| Operating Temperature | -10 ~ +50 ℃ |
| Storage Temperature | -20 ~ +60 ℃ |
| Operating Humidity | 30% ~ 80% |
| Product Specifications | 350mm (W), 240mm (L), 75mm (H) |
FEATURE
- Function to display the status of the main device and expander device by interfacing with the main device
- Boundary and disarm functions for the main device (Supported only on SMART-A1V50, 55, SMART-A3V21 versions)
- Boundary and disarm functions for the expander
- Connects to the main device via the RS485 communication line with a card reader
- Displays the zone detection status of the main device and expander
- Displays intrusion status of the main device and expander (Intrusion zone LED blinks)
- Individual and group selection for boundary and disarm functions for the expander
- DIP/SW for selecting 8 or 16 expanders
- DIP/SW for selecting voice volume (100%, 90%, 80%, mute option)
- DIP/SW for turning the siren ON/OFF (Siren ON/OFF when an intrusion occurs in the main device or expander)
- When RS485 communication is disconnected, it audibly states “Please check RS485 communication” (disconnection check time: 30 seconds)
- When the main or expander device is disconnected, both mode LED and zone LED are turned OFF
- When selecting a disconnected expander, an audible message of “disconnected” is output
- When selecting all expanders, only non-disconnected RB-480 (subscriber expander) is automatically selected
- If there is an RS-485 communication issue, it outputs “Please check RS-485 communication” audibly
- When selecting the main or expander device, it outputs “Please check RS-485 communication” audibly
- Partial zone display function
- Main and subscriber expander (RB-480): Partial zone continuously lit
- Zone expander (RB-490): Blinks in partial zone when disarmed, lit in partial zone when in boundary mode
- Error sound occurs when both main and expander are selected together
- Error sound occurs when boundary and disarm are selected together
